Xtraseal Genuine Xtraseal Clear RTV Silicone heat resistant sealant 85gr

Status: Available
Brand: X'traseal
SKU code: 325326000001
GET A QUOTE

Product Highlights:

  • High temperature resistant gaskets and joints sealed.
  • Sealing industrial ovens.
  • Application of on-site shaped gaskets.
  • Assemblies in glass, ceramic coated metal, epoxy and polyester panels, polystyrene, anodised aluminum, stainless steel, metal surface finishes and wood finishes.
See more product details

Related products

Xtraseal MC800st - Acrylic SEAL AND PAINT Wall Sealant 100gr Tube

SEAL'N PAINT MC-800ST is a one-part, water-based acrylic sealer. Good adhesion, anti-mold, anti-moss, easy to clean with water. No primer is required...

Xtraseal Xbond - Multi-purpose construction adhesive Xtraseal Xbond Adhesive Tube 85gr

Easy to construct and use . High initial adhesion . Great binding strength, high durability . Good water resistance . Safe with Styrene . Low cost.

Xtraseal Fungicide Sealant - Genuine Xtraseal Colosil Fungicide Sealant 85gr

Resists mold and mildew (fungicides) Neutral curing system, oxime Does not corrode metal Does not corrode alkaline substrates Does not corrode cars Outstanding durability One part...

Xtraseal 625F 85gr White RTV grout replacement adhesive in tube form

Acetic acid curing system. Does not corrode car details. Resistant to high temperatures up to 200°C Wide application temperature (-20°C to +50°C). Low shrinkage. No...

Xtraseal 625F 85gr Black RTV grout replacement in tube form

Acetic acid curing system. Does not corrode car details. Resistant to high temperatures up to 200°C Wide application temperature (-20°C to +50°C). Low shrinkage. No...

Xtraseal CA-288 multi-purpose contact adhesive (Yellow Glue)

Xtraseal CA-288: Contact adhesive Medium viscosity, long adhesion time Easy application Cost-effective Very strong adhesion

  • Remove old pad material from the surface thoroughly.
  • Clean the surface with a residue-free solvent and allow the surface to dry.
  • Cut the faucet to the desired size.
  • Squeeze the tube to form a continuous and uniform bead to the perimeter of the mating surface and all bolt holes.
  • Tools within 5 minutes.
  • Tighten to required torque, do not tighten too tight.
  • Clean off excess glue with MEK or toluene.
BACK TO TOP