Order code | S-A1 |
Trademark | X'traseal |
Made in | Malaysia |
Expiry | 12 months |
Specifications | Acetoxy acid curing system Long lasting, weather resistant One component, no mixing Good adhesion, no primer required to most contact surfaces Adhesion: glass, plastic, water pipes,… Welding, waterproofing: glass, granite, sheet metal, ceilings, air conditioners,... |
Specifications:
Density: 1.03±0.01
Hardness: (Shore A) ±23
Elasticity: 400%
Tensile strength: ±1.8 Mpa
Displacement: 25%
Surface drying time: About 5 minutes
Time without peeling: 15 minutes
Usage temperature: -20C ~ 50C
Operating temperature: -50C ~ 150C
Expiry date: 12 months
Drying Time:
Surface drying time is 15 minutes and completely dry to a depth of 10 mm after 7 days. Actual drying time may vary depending on weather and air humidity in each area.