This is paint thinner. Designed to improve the spreadability of Jotun acrylic, vinyl and antifouling products. Can also be used as a cleaning agent for paint pumps and equipment before and after painting.
It is recommended to use as described on the product's individual technical data sheets or application instructions.
Color
Clear
Specifications
| Characteristic | Testing/Standards | Describe |
| Solid volume | ISO 3233 | 0 ± 2 % |
| Flash point | ISO 3679 Method 1 | 25°C |
| Proportion | Calculate | 0.9 kg/l |
| VOC-US/ Hong Kong | US EPA method 24 (test) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong) | 871 g/l |
| VOC – EU | IED (2010/75/EU) (theoretical) | 870 g/l |
| VOC-China | GB/T 23985-2009 (ISO 11890-1) (tested) | 870 g/l |
Packaging
5L - 20L
Storage
This product should be stored according to each country's safety regulations. Store the product in a cool, dry place with good ventilation, away from heat sources and ignition devices. Product containers must be tightly closed. Transport carefully.
Storage time at 23 degrees Celsius:
48 months.
Other Variant
No.7
No.23
No.10
No.17
Refer to separate TDS for each variant.
ATTENTION:
This Jotun thinner product should only be applied by a professional contractor. Painting contractors must be trained, experienced, capable and equipped to apply this type of paint correctly and in accordance with Jotun's technical procedures. Painting contractors must wear appropriate personal protective equipment when using this product. This guide is based on current knowledge of the product. Any changes to suit site conditions must be approved by a Jotun Representative before proceeding.
Health and Safety
Please follow the precautions listed on the paint container label. Use in well-ventilated conditions. Do not breathe paint dust. Avoid direct contact with skin. If it gets on skin, wash immediately with cleaning solution, soap and water. You must immerse your eyes in water and go to a medical facility immediately.
Color fluctuation
When the thinner product Jotun uses is an anti-rust or anti-fouling layer, the paint film may slightly change in color from batch to batch. These products may discolor and become chalky when exposed to sunlight and outdoor weather.
Exemptions
The information contained in this document is given to the best of Jotun's knowledge, based on tests and practical experience. Jotun products are considered semi-finished products until they are properly applied to the structural surface to be protected. However, in practice, the product may be used in conditions beyond Jotun's control. So Jotun can only guarantee the inherent quality of the product. Products may be subject to minor changes to suit local country requirements. Jotun reserves the right to change the given parameters without notice.
